Surface Treatment

Products

Flow finishing machine model: LLB50/80


1. equipment functions: 1. Remove burrs, burrs, oxide skin, rust, turning tool lines, coatings and slight scratches on the surface of the workpiece; 2. Carry out inverted blunt treatment on sharp corners, edges, sharp edges and tough edges of the workpiece; 3. Polish the surface of the workpiece to reduce the surface roughness of the workpiece. 4. Eliminate the stress of the workpiece and improve the surface strength of the workpiece. 2. scope of application: applicable to the geometric size of less than 10mm, and not easy to appear broken workpiece. The workpiece material is not limited. Features of 3. equipment: 1. The equipment adopts manual turning and discharging, which has the characteristics of small area, simple and convenient operation, etc. It is an economical flow type finishing machine produced by our company. 2. The rotating speed of the rotating disc is adjusted by the frequency converter, which is energy-saving and practical. The rotating speed of the rotating disc is 0-180 rpm. 4. options configuration: 1. Wear-resistant steel ring: added at the gap of the grinding barrel, which can reduce the gap of the grinding barrel and prolong the service life of the grinding barrel lining.

Vibration finishing machine model: ZLC300


1. equipment features: the equipment adopts long groove flat bottom design, more suitable for large, long axis of the workpiece use. The standard frequency conversion system can adjust the vibration frequency of the equipment according to the grinding needs. 2. option configuration: 1. Partition tooling: large workpieces that are afraid of collision can be isolated to avoid mutual injury between workpieces. 2. Noise reduction cover: The equipment can be added with automatic noise reduction cover, which can effectively reduce the working noise of the equipment. 3. Water and liquid filling device: realize automatic water and liquid filling of the equipment, and the flow rate is controllable. 4, PLC electronic control system: programmable control, improve the degree of automation of equipment.

Case 1 of automatic line of finishing machine


Brief introduction of equipment: the automatic line is mainly composed of vibrating finishing machine, vibrating sorting screen, conveyor, spray cleaning machine, tunnel dryer, sewage treatment machine, etc. it can realize the functions of automatic feeding, automatic water adding, automatic liquid adding, automatic grinding, automatic discharging, automatic sorting, automatic cleaning, automatic drying, sewage filtration and recycling, etc.

Lighting machine automatic line case 2


Brief introduction of equipment: the automatic line is mainly composed of mobile finishing machine, vibrating finishing machine, spray cleaning machine, tunnel dryer, conveyor, sewage treatment machine, weighing and sub-packaging, etc. it can realize the functions of automatic feeding, automatic water addition, automatic liquid addition, workpiece fine grinding, workpiece rough grinding, automatic discharging, automatic sorting, automatic cleaning, automatic drying, weighing and sub-packaging, sewage filtration and recycling, etc.