CN
EN
Flow finishing machine model: LLD35/35*2
LLD type: 1. equipment functions: 1. Remove burrs, burrs, oxide scale, rust, turning tool lines, coatings and slight scratches on the surface of the workpiece; 2. Carry out obtuse treatment on sharp corners, edges, sharp edges and tough mouths of the workpiece; 3. Polish the surface of the workpiece to reduce the surface roughness of the workpiece. 4. Eliminate the stress of the workpiece and improve the surface strength of the workpiece. 2. scope of application: suitable for geometric size less than 8mm, and not easy to appear broken workpiece. The workpiece material is not limited. Features of 3. equipment: 1. The equipment adopts manual turning and discharging, and the operation is simple and convenient. It is a high-speed mobile finishing machine produced by our company. 2. The equipment is equipped with circulating water pump, which can carry out circulating water operation. 3. The rotating speed of the rotating disc is adjusted by the frequency converter, which is energy-saving and practical. The rotating speed of the rotating disc is 0-350 rpm. 4. The grinding barrel of the equipment adopts ultra-small gap design, the minimum gap can reach 0.2mm, which is more suitable for ultra-thin workpieces. 5. The equipment is equipped with single barrel and double barrel models, and customers can choose according to their needs. 4. option configuration: 1. The equipment is equipped with a single steel ring as standard, and double steel rings can be added according to requirements, which is more suitable for ultra-thin workpieces.
Key words:
Surface Treatment
Classification:
Mobile type finishing machine series
Hotline:
Detailed introduction
LLDType:
1. device features:
1Remove burrs, burrs, oxide skin, rust, lathe pattern, coating and slight scratches on the surface of the workpiece;
2The sharp corners, edges, sharp edges and tough mouth of the workpiece shall be obtuse-treated;
3The surface of the workpiece is polished to reduce the surface roughness of the workpiece.
4Eliminate the stress of the workpiece and improve the surface strength of the workpiece.
2. scope of application:
Suitable for geometric dimensions less than 8mm,And not easy to appear broken workpiece. The workpiece material is not limited.
3. equipment features:
1The equipment adopts manual overturning and discharging, and the operation is simple and convenient. It is a high-speed mobile finishing machine produced by our company.
2The equipment is equipped with circulating water pump, which can carry out circulating water operation.
3This model is adjusted by the inverter rotating disk speed, energy saving and practical, turntable speed: 0-350turn/min.
4The equipment grinding barrel adopts ultra-small gap design, the minimum gap can reach 0.2mmMore suitable for ultra-thin workpiece use.
5The equipment is equipped with single barrel and double barrel two models, customers can choose according to their needs.
4. option configuration:
1The equipment is equipped with a single steel ring as standard, and double steel rings can be added according to requirements, which is more suitable for ultra-thin workpieces.
5. main parameter table:
|
Model |
Volume |
Overall dimensions (length * width * height) |
Motor power |
Speed |
Grinding barrel inner dimension (diameter * depth) |
Loading capacity |
|
LLD18 |
18 |
770*700*1310 |
0.75 |
0-400 |
296*275 |
10L |
|
LLD35 |
35 |
880*770*1440 |
2.2 |
0-400 |
388*320 |
18L |
|
LLD35*2 |
35*2 |
1480*1000*1440 |
2.2*2 |
0-400 |
388*320 |
18L*2 |
online message
The self-created brand "Daguang" brand optical decoration machine has gradually become a well-known brand in the optical decoration machine industry at home and abroad. It has obtained international ISO certification and European CE certification, and has obtained more than 40 national patents in the technical field.
Telephone
/ TEL
Mailbox
Address
/ ADD
No.27, Xinyi Street, Youjia Industrial Park, Ganjingzi District, Dalian City
