CN
EN
Centrifugal finishing machine model: LXC60
1. equipment functions: 1. Remove burrs, burrs, oxide skin, rust, turning tool lines, coatings and slight scratches on the surface of the workpiece; 2. Carry out inverted blunt treatment on sharp corners, edges, sharp edges and tough edges of the workpiece; 3. Polish the surface of the workpiece to reduce the surface roughness of the workpiece. 4. Eliminate the stress of the workpiece and improve the surface strength of the workpiece. 2. scope of application: less than the size of the lining barrel workpiece can be used, centrifugal polishing machine polishing effect is much higher than other models, more suitable for workpiece polishing. 3. equipment features: 1, with frequency conversion system, according to the need to adjust the grinding barrel speed. 2. The lining barrel is made of imported wear-resistant polyurethane and can be replaced at any time. It has the characteristics of acid and alkali resistance, low cost, long service life and fast replacement speed. 3. The 30-liter, 60-liter and 100-liter equipment adopts high-strength nylon gear transmission, and the 160-liter and 220-liter equipment adopts synchronous belt transmission, which has the characteristics of low noise, long service life, and stable operation. 4. It adopts arc sliding door design and is equipped with safety contact switch, which has the characteristics of saving space and safe operation. 5. This model is equipped with a receiving cart or a vibrating sorting screen on the left side of the equipment. Customers can choose one according to their needs. 4. option configuration: 1. Multi-station lining barrel: multiple partitions are poured inside the lining barrel to isolate large workpieces that are afraid of collision to avoid mutual damage between workpieces
Key words:
Surface Treatment
Classification:
Centrifugal finishing machine series
Hotline:
Detailed introduction
1. device features:
1Remove burrs, burrs, oxide skin, rust, lathe pattern, coating and slight scratches on the surface of the workpiece;
2The sharp corners, edges, sharp edges and tough mouth of the workpiece shall be obtuse-treated;
3The surface of the workpiece is polished to reduce the surface roughness of the workpiece.
4Eliminate the stress of the workpiece and improve the surface strength of the workpiece.
2. scope of application:
Workpieces smaller than the size of the lining barrel can be used, and the polishing effect of the centrifugal finishing machine is much higher than that of other models, which is more suitable for polishing the workpiece.
3. equipment features:
13. With frequency conversion system, the rotating speed of the grinding barrel can be adjusted arbitrarily according to the needs.
2The lining barrel is made of imported wear-resistant polyurethane and can be replaced at any time. It has the characteristics of acid and alkali resistance, low cost, long service life and fast replacement speed.
3、30Liters, 60 liters, 100 liters equipment adopts high-strength nylon gear transmission, 160 liters, 220 liters equipment adopts synchronous belt transmission, which has the characteristics of low noise, long service life, stable operation and so on.
4It adopts arc sliding door design and is equipped with safety contact switch, which has the characteristics of saving space and safe operation.
5The machine is equipped with a receiving cart or a vibrating sorting screen on the left side of the equipment, and customers can choose one according to their needs.
4. option configuration:
1Multi-station lining barrel: multiple partitions are poured inside the lining barrel to isolate large workpieces that are afraid of collision to avoid mutual damage between workpieces.
5. main parameter table:
online message
The self-created brand "Daguang" brand optical decoration machine has gradually become a well-known brand in the optical decoration machine industry at home and abroad. It has obtained international ISO certification and European CE certification, and has obtained more than 40 national patents in the technical field.
Telephone
/ TEL
Mailbox
Address
/ ADD
No.27, Xinyi Street, Youjia Industrial Park, Ganjingzi District, Dalian City
