+
  • 滚筒式光饰机  型号:GT50x2.jpg

Roller finishing machine model: GTF50 * 2


1. equipment functions: 1. Remove burrs, burrs, oxide skin, rust, turning tool lines, coatings and slight scratches on the surface of the workpiece; 2. Carry out inverted blunt treatment on sharp corners, edges, sharp edges and tough edges of the workpiece; 3. Polish the surface of the workpiece to reduce the surface roughness of the workpiece. 2. scope of application: ultra-thin, ultra-small, needle-shaped workpiece. 3. equipment features: 1, with frequency conversion system, according to the need to adjust the grinding barrel speed. 2. The inner wall of the grinding barrel is poured with imported wear-resistant polyurethane through a special mold, which has the characteristics of long service life, low replacement cost, and acid and alkali corrosion resistance. 3. Driven by belt roller, no noise, simple and convenient operation. 4. The model adopts double grinding barrel design, which can be controlled independently.

Key words:

Surface Treatment

Classification:

Drum type finishing machine series

Picture Name

Hotline:

Detailed introduction


online message

Submit Message