Mobile finishing machine model: LLD6/6*2/6*3
1. equipment functions: 1. Remove burrs, burrs, oxide skin, rust, turning tool lines, coatings and slight scratches on the surface of the workpiece; 2. Carry out inverted blunt treatment on sharp corners, edges, sharp edges and tough edges of the workpiece; 3. Polish the surface of the workpiece to reduce the surface roughness of the workpiece. 4. Eliminate the stress of the workpiece and improve the surface strength of the workpiece. 2. scope of application: applicable to the maximum geometric size of less than 5mm, and not easy to appear broken workpiece. The workpiece material is not limited. Features of 3. equipment: 1. The equipment adopts manual turning and discharging, and the operation is simple and convenient. It is a mobile finishing machine suitable for small batch workpieces produced by our company. 2. The equipment is equipped with circulating water pump, which can carry out circulating water operation. 3. The rotating speed of the rotating disc is adjusted by the frequency converter, which is energy-saving and practical. The rotating speed of the rotating disc is 0-180 rpm. 4. The grinding barrel of the equipment adopts ultra-small gap design, the minimum gap can reach 0.2mm, which is more suitable for ultra-thin workpieces. 5, the equipment is equipped with single barrel, double barrel and three barrels of three forms, customers can choose according to their needs. 4. option configuration: 5. main parameter table: model volume external dimension (length * width * height) motor power speed grinding barrel internal dimension (diameter * depth) equipment load equipment net weight LLD6 LLD6 * 2 LLD6 * 3 LLD10 LLD10 * 2 LLD10 * 3 LLD20
Key words:
Surface Treatment
Classification:
Mobile type finishing machine series
Hotline:
Detailed introduction
1. device features:
1Remove burrs, burrs, oxide skin, rust, lathe pattern, coating and slight scratches on the surface of the workpiece;
2The sharp corners, edges, sharp edges and tough mouth of the workpiece shall be obtuse-treated;
3The surface of the workpiece is polished to reduce the surface roughness of the workpiece.
4Eliminate the stress of the workpiece and improve the surface strength of the workpiece.
2. scope of application:
Suitable for geometric size less than 5mm, and not easy to appear broken workpiece. The workpiece material is not limited.
3. equipment features:
1The equipment adopts manual overturning and discharging, and the operation is simple and convenient. It is a mobile finishing machine suitable for small batch workpieces produced by our company.
2The equipment is equipped with circulating water pump, which can carry out circulating water operation.
32. The rotating speed of the rotating disc is adjusted by the frequency converter, which is energy-saving and practical. The rotating speed of the rotating disc is 0-180turn/min.
4The equipment grinding barrel adopts ultra-small gap design, the minimum gap can reach 0.2mmMore suitable for ultra-thin workpiece use.
5The equipment has three forms of single barrel, double barrel and three barrels, and customers can choose according to their needs.
4. option configuration:
5. main parameter table:
online message