Vibratory machine model: ZLXA100/200/300/450/600

The machine is composed of inertial vibrator, vessel, electrical cabinet, noise cover and basement (Shown in outline drawing).

a. Inertial vibrator: This is the vibrating source of the machine, it is composed of vibratory motor, springs and eccentric blocks. The magnitude of amplitude is adjusted by the angle between upper and lower eccentric blocks and the steel plates.

b. Vessel: The vessel is welded of annular steel plate. It is lined with wear-resisting material, Polyurethane, to weaken the noise and the bump of workpieces on vessel. There are media outlet and water outlet on the bottom of the vessel to discharge the media, dirty water and grinding liquid. At the media outlet, there is a double layer screen used to classify workpieces automatically, the size of holes on the screens could be chosen according to the sizes of workpieces and the media. After the polishing procedure has been completed, pull on the dam blade and screen, the workpieces will be separated automatically. The process could be continued when the dam blade is pulled down.

c. Electrical cabinet: Hanged cabinet or single cabinet. Operate the machine by buttons on the control panel.

d. Basement: It is weld of steel, spring on the basement can reduce the vibratory of inertial vibratory. Adjust the eccentric block after moving the balde on both sides of the basement.