Model of vibrating finishing machine: ZLX100/200/300/450/600/800/1200
Features of 1. equipment: The equipment adopts arc edge design, and the grinding efficiency is 1.2 times that of straight edge finishing machine. The standard manual flap sorting device can realize the automatic separation of workpiece and abrasive. More suitable for grinding large quantities of workpieces. 2. options configuration: 1, frequency converter: adjustable equipment vibration frequency. 2. Muffling cover: The device is divided into two control modes: manual and electronic control, which can be selected according to needs. After adding, it can effectively reduce the working noise of the equipment (see Figure 2 and Figure 3). 3. Water and liquid filling device: realize automatic water and liquid filling of the equipment, and the flow rate is controllable. 4, electric control flap: can replace the manual flap, reduce the amount of labor workers. 5. Automatic feeding device: to realize the automatic addition of abrasives and workpieces to the equipment. 6, PLC electronic control system: programmable control, improve the degree of automation of equipment. 7. Floating flap: The model of the floating plate adopts a flat-bottom design, and uses the positive and negative rotation function of the motor to make the flap rise and fall naturally, which can reduce the collision probability during workpiece grinding.
Key words:
Surface Treatment
Classification:
Vibration type finishing machine series
Hotline:
Detailed introduction
1. equipment features:
The equipment adopts arc edge design, and the grinding efficiency is the 1.2 of the straight edge type finishing machineTimes. The standard manual flap sorting device can realize the automatic separation of workpiece and abrasive. More suitable for grinding large quantities of workpieces.
2. option configuration:
1Inverter: adjustable equipment vibration frequency.
2, silencer cover: The device is divided into two control modes: manual and electronic control, which can be selected according to needs. After adding, it can effectively reduce the working noise of the equipment (see Figure 2、3)。
32. Water and liquid filling device: realize automatic water and liquid filling of the equipment with controllable flow.
42. Electric control flap: manual flap can be replaced to reduce the labor of workers.
53. Automatic feeding device: to realize the automatic addition of abrasives and workpieces to the equipment.
6、PLCElectronic control system: programmable control, improve the degree of automation of equipment.
72. Floating flap: The model of the floating plate adopts a flat-bottom design, and uses the forward and reverse rotation function of the motor to make the flap rise and fall naturally, which can reduce the collision probability during workpiece grinding.
Main parameters of 3. equipment:
online message